Question

We are trying to find a supplier to replace the ceramic hot plates within this servery counter for a good client of ours.

Counter was originally manufactured by EMH. I have tried a couple of other servery counter suppliers who can’t help out. Site location: Guildford.

We are looking for a supplier who can remove existing and dispose, supply and install new ceramic plates to match. Size of hot plates and images below.

ceramic insert
all together 181cm/51cm as one piece
60cm/51cm each one individually.

Replies

    1. Contact CED to see if they know where the distributor could get the same plates from and then get service agent to fit them. The counter manufacturers won’t want to do it but CED might know what make plates they used?
    2. Contact Stuart Russell, Sales Director at CED Fabrications Ltd – Stuart.Russell@cedlimited.com Mobile: 07917303122
    3. What about Storer, 0115 9200329 they make the carvery decks for Mitchells & Butlers or you can buy them in from Hawco as one assembly and replace themselves they are usually only bedded in heat resistant silicone around the edges Hawco sell all that is required to do yourself.
    4. Contact Greg Swift – gregs@cateringfabrications.com
    5. This would be something AGGORA Projects could assist with. We would need to undertake a site survey before providing any costs, so would be grateful if you could forward our details to your member, that would be much appreciated. AGGORA Group, Centech House, Centech Park, North Moons Moat, Redditch, Worcestershire, B98 9NR. Office: 0845 1177 555 ext: 132 www.aggora.com
    6. We have purchased these before from spares company CCS. BUT they can be an odd size. You can un-silicone the pad off the bottom of the ceramic plate then re fit a new pad.Not the best job but okay for a good engineer…
    7. I believe First Choice can supply the parts.
    8. I believe the ceran plates and heater pads would have come from Hawco at 600 x 500mm each and they should be able to be installed and replaced as a set.It’s worth also checking the controller system EMH would have used as you may have to replace everything from controllers to the plates to ensure a correct installation.
    9. I would suggest that these will be Ceran Hotplates. These can be purchased complete with the Heater Mats fitted however the standard sizes are 500mm x 600mm each so look like the size detailed. When fitted they will also require the Black Heat Resistant Sealant. We cover this area and could carry out the works if required.
    10. The best person to sort this out is Stuart Russell, CED. He was EMH. Contact: Stuart.Russell@cedlimited.com 07917 303122
    11. One of the best ‘cut and carve’ companies with specialist servery abilities I’ve ever known are Essex Fabrications in Basildon, and reasonably close geographically.
    12. Try Hawco
    13. What about Storer, 0115 9200329 they make the carvery decks for Mitchells & Butlers or you can buy them in from Hawco as one assembly and replace themselves they are usually only bedded in heat resistant silicone around the edges Hawco sell all that is required to do yourself.
    14. They look like standard Ceran hotplate sections? But try Comet Catering in Enfield – they are a high-end fabricator we know well and have a lot of experience in a wide range of weird and wonderful bespoke countering! Julian Webb 0207 804 4779 – let him know that Fulcrum suggested Comet and he should be glad to assist.
Back to the Question List